Analog IP
Innopower provides many types of Analog IP in various processes. These Analog IP provide wide variety solutions for customer's analog application.
Bandgap Reference
The bandgap reference (BG) circuits provide the reference voltage for other
analog IP as a reference voltage standard. The internal trimming design is adopted to
obtain the accurate output voltage to cover process variation. Delayed Locked Loop
Delayed Locked Loop (DLL) generates some channel DQS with variable timing delay
for digital controller. It is suitable for DDR/DDR2 SDRAM controller. Oscillators Oscillators (OSC) is a self-contained ring oscillator or internal
resistor/capacitor oscillator with selected output frequency. This IP provides a clock
source for digital controller. Phase Locked Loop
Phase Locked Loop (PLL) provides a clock multiplier and/or de-skew circuit to
generate a stable, high-speed clock from an external slower clock signal. Power On Reset The Power On Reset (POR) circuit generates a output signal that indicate the
power is good when power supply becomes available and stable.
Pulse Width Modulation—Switching Regulator The switching regulators (PWM) provides a high current driving capability, It is
used to regulate the higher output voltages.
Linear Regulator— Low Drop-out Regulator Regulator (REG) is a low drop-out linear regulator with high current driving
capability and low quiescent current.Voltage Detectors The voltage detector (VDT) is designed to detect the precise high/low levels of a reference voltage.
|